Russian Federation
Moscow, Moscow, Russian Federation
This work is devoted to the development of a script to reduce the time of reinforcement elements based on the use of an automation algorithm developed in the Dynamo environment. Thus, the purpose of the work is to solve the problem of automating the process of reinforcing reinforced concrete pipes in the Autodesk Revit software package using the Dynamo add-on. The developed algorithm has been tested in the reinforcement of several types of pipes. To adjust the algorithm, the existing norms for the reinforcement of reinforced concrete pipes are determined and taken as a basis. The presented approach can be optimized and used in the reinforcement of water conduits of technically complex objects, for example, hydraulic structures.
information modeling, reinforced concrete conduits, design automation, Autodesk Revit, Dynamo
1. Evtushenko S.I., Shilova L.A., Ulesikova E.S., Kuchumov M.A. Informacionnoe modelirovanie tonnelya metro s protivovibracionnymi meropriyatiyami// Nauka i biznes: puti razvitiya №10(100), 2019. S.29-35.
2. Tyurin I.A. Opredelenie vostrebovannosti avtomatizirovannoy razrabotki smetnoy dokumentacii // Vestnik nauchnyh konferenciy. 2018. № 7-2(35)
3. Ginzburg A.V. BIM-tehnologii na protyazhenii zhiznennogo cikla stroitel'nogo ob'ekta / Informacionnye resursy Rossii, 2016. №5 -s. 28-31.
4. Kagan P.B., Gudkov P.K. Informacionnoe modelirovanie zdaniy i tradicionnoe proektirovanie s primeneniem SAPR // Vestnik Belgorodskogo gosudarstvennogo tehnologicheskogo universiteta im. V.G. Shuhova. 2017.№ 9. S. 164-168.
5. Garyaev N.A., Krasnoschekova A.I., Knyazev A.A. Analiz riskov, voznikayuschih pri vnedrenii BIM-tehnologiy v stroitel'nyh organizaciyah // BST: Byulleten' stroitel'noy tehniki. 2018. № 7 (1007). S. 58-61.
6. Talapov V.V. Tehnologiya BIM. Sut' i osobennosti vnedreniya informacionnogo modelirovaniya zdaniy / -M.: Izdatel'stvo "DMK Press", 2015. - 410 s.
7. Gribkova I.S., Gorenko D.A. Obzor programmnogo obespecheniya dlya ispol'zovaniya BIM modeley // Elektronnyy setevoy politematicheskiy zhurnal "Nauchnye trudy KubGTU". 2018. № 2. S. 211-221.
8. Puchenkov I.S., Evtushenko S.I. Sozdanie Informacionnoy modeli zdaniya v srede obschih dannyh // Stroitel'stvo i arhitektura. - 2021. - T. 9, Vyp. 1 (30). - S. 46-50. DOIhttps://doi.org/10.29039/2308-0191-2021-9-1-46-50
9. Puchenkov I.S., Evtushenko S.I. Avtomatizaciya vygruzki i obrabotki modeli // Mater. IV Mezhdunar. nauchno-prakt. konf. «BIM-modelirovanie v zadachah stroitel'stva i arhitektury (BIMAC 2021)».- Sankt-Peterburg: SPbGASU, 2021 s. 286-295. DOI:https://doi.org/10.23968/BIMAC.2021.046
10. Ulanov A.V., Evtushenko S.I. Problemy resheniya primeneniya BIM tehnologiy pri proektirovanii okon // Mater. III Mezhdunar. nauchno-prakt. konf. «BIM-modelirovanie v zadachah stroitel'stva i arhitektury (BIMAC 2020)».- Sankt-Peterburg: SPbGASU, 2020 s. 286-295. DOI:https://doi.org/10.23968/BIMAC.2020.037
11. Nikandrova L.V., Evtushenko S.I. Ispol'zovanie tehnologiy informacionnogo modelirovaniya pri razrabotke proektnoy i rabochey dokumentacii // Informacionnye tehnologii v obsledovanii ekspluatiruemyh zdaniy i sooruzheniy: mater. XIX mezhdun. nauchn.-tehn. konf., Novocherkassk 22-23 oktyabrya 2020 g./ Yuzh.-Ros. gos. politehn. Un-t (NPI) imeni M.I. Platova.- Novocherkassk: Lik, 2020.- S. 4-9.
12. Ostashev R.V., Evtushenko S.I. Analiz plagina dlya svyazi informacionnyh modeley zdaniy Direct Link // Informacionnye tehnologii v obsledovanii ekspluatiruemyh zdaniy i sooruzheniy: mater. XIX mezhdun. nauchn.-tehn. konf., Novocherkassk 22-23 oktyabrya 2020 g./ Yuzh.-Ros. gos. politehn. un-t (NPI) imeni M.I. Platova.- Novocherkassk: Lik, 2020.- S. 9-13.
13. Tyurin I. Methods of computer modeling of cost models for buildings // IOP Conf. Ser.: Mater. Sci. Eng. 2020. 869. 062031.
14. Ginzburg A., Tyurin I. Automated identification of construction works and structural elements at an early stage of investment and construction projects’ implementation // XXIV International Scientific Conference “Construction the Formation of Living Environment” (FORM-2021). E3S Web of Conferences 263, 03008.
15. Shilov L., Evtushenko S., Arkhipov D., Shilova L. The prospects of information technology using for the analysis of industrial buildings defects // (2021) IOP Conf. Series: Materials Science and Engineering 1030 (1) 012039. DOIhttps://doi.org/10.1088/1757-899X/1030/1/012039
16. Wang, J., Yuan, Z., He, Z., Zhou, F., Wu, Z. Critical factors affecting team work efficiency in BIM-based collaborative design: An empirical study in China//Buildings.2021. 11(10),486
17. Adekunle, S.A., Ejohwomu, O., Aigbavboa, C.O. Building information modelling diffusion research in developing countries: A user meta-model approach//Buildings.2021.11(7),264
18. Altohami, A.B.A., Haron, N.A., Ales Alias, A.H., Law, T.H. Investigating approaches of integrating BIM, IoT, and facility management for renovating existing buildings: A review// Sustainability (Switzerland).2021. 13(7),3930
19. Khattra, S.K., Singh, J., Rai, H.S.A Statistical Review to Study the Structural Stability of Buildings Using Building Information Modelling//Archives of Computational Methods in Engineering.2021
20. Yang, A., Han, M., Zeng, Q., Sun, Y. Adopting Building Information Modeling (BIM) for the Development of Smart Buildings: A Review of Enabling Applications and Challenges//Advances in Civil Engineering.2021. 2021,8811476
