IDENTIFICATION OF RESIDUAL STRESSESIN PRODUCTS FROM CARBON- CARBONACEOUSMATERIALS

Anna Kaznacheeva; Yuliya Polinko

doi:10.12737/17526

IDENTIFICATION OF RESIDUAL STRESSESIN PRODUCTS FROM CARBON- CARBONACEOUSMATERIALS

Published in Construction and Architecture · Volume 2, Issue 4 · Pages 0–0 · Rubric: 05.23.17 CONSTRUCTION MECHANICS

DOI: https://doi.org/10.12737/17526

Received: 28.01.2016 Accepted: 28.01.2016 Published: 28.01.2016 Language of publication: RUS

Authors

Anna Kaznacheeva

Yuliya Polinko

Anna Kaznacheeva

Yuliya Polinko

ABSTRACT

The method of assessing the level of residual stresses in graphitic carbon shell of revo-lution, by interpreting the experimental data obtained by the x-ray method is proposed. The results of experimental studies of mental-phase composition, the parameters of the crystal lattice, the degree of graphitization and texturing of pyrolytic reinforced carbon-carbonaceous composite are given. Estimation of the level of residual technological tensions resulting in defects of products has been performed at the micro and macro stages. Quality criterion is written as a deviation square sum, calculated and measured broa-dening of diffractogram lines. High informativity of the radiographic method for estimating artificial graphite prod-uct quality and the possibility of using this method in the production environment.

KEYWORDS

identification, composite materials, radiographic method, residual stresses non-destructive testing.

1. Kaznacheeva O.K., Kaledin V.O. Identifikatsiya parametrov uprugosti i zhestkosti konstruktsiy iz armirovannykh materialov: monografiya. - Novocherkassk:Lik, 2012. - 136 s.

2. Kaznacheeva O.K., Kalashnikov S.Yu., Bobina E.A. Metodika nerazrushayushchego kontrolya privedennykh uprugikh kharakteristik v izdeliyakh iz kompozitnykh materialov.// Nauka i obrazovanie: arkhitektura, gradostroitel´stvo i stroitel´stvo: materialy Mezhdunarodnoy konferentsii, posvyashchennoy 80-letiyu stroitel´nogo obrazovaniya i 40-letiyu arkhitekturnogo obrazovaniya Volgogradskoy oblasti, 6-10 sentyabrya 2010 g., Volgograd / Volgogr. gos. arkhit.-stroit. univ. - Volgograd: VolgGASU, 2010. - S. 301-308.

3. Reznichenko A.I., Kaznacheeva O.K. Issledovanie fiziko-mekhanicheskikh parametrov i urovney ostatochnykh napryazheniy rentgenograficheskimi metodami. Izv. vuzov Severo-Kavkazskiy region. Ser. Tekhnicheskie nauki. -1999. - № 2. - S. 125-129.

4. Kaznacheeva O.K., Bobina E.A. Identifikatsiya ostatochnykh napryazheniy v obolochke iz kompozitsionnogo materiala.. Optimizatsiya i resursosberezhenie stroitel´nykh konstruktsiy zdaniy i sooruzheniy, vodokhozyaystvennykh sistem i inzhenernaya ekologiya: Materialy mezhdunarodnoy nauchno-prakticheskoy konferentsii, posvyashchennoy pamyati professora, doktora tekhnicheskikh nauk, krupnogo spetsialista v oblasti proektirovaniya i stroitel´stva unikal´nykh sooruzheniy Igorya Svyatoslavovicha Durova (1914-1994) / Yuzh.-Ros. gos. politekhn. un-t (NPI) im. M.I. Platova. -Novocherkassk: YuRGPU (NPI), 2014. - S. 35-36.

5. Lebedev Yu.N., Shmakova E.S., Khakimova D.K. Issledovanie mikrodeformatsiy v strukture pirografita pri ego nagreve. V sb.: Uglerodnye konstruktsionnye materialy. M.: Metallurgiya, 1984. S. 53-56.

This work is licensed under Creative Commons Attribution-NonCommercial 4.0 International

JATS XML

Editor-in-Chief

Azariy Lapidus

Deputy Editor-in-Chief

Lyubov' Adamcevich

AdamtsevichLA@gmail.com

Publishing editor

Anastasia Tepikina

anastas1ya@yandex.ru

This work is licensed under Creative Commons Attribution-NonCommercial 4.0 International Creative Commons

GOST

Kaznacheeva A., Polinko Y. IDENTIFICATION OF RESIDUAL STRESSESIN PRODUCTS FROM CARBON- CARBONACEOUSMATERIALS // Construction and Architecture. 2016. no. 4. pp. 0-0. DOI: https://doi.org/10.12737/17526. (Date of access 28.09.2026).

MLA

Anna Kaznacheeva, Polinko Y.. "IDENTIFICATION OF RESIDUAL STRESSESIN PRODUCTS FROM CARBON- CARBONACEOUSMATERIALS." Construction and Architecture 2.4 (2016): 0-0. DOI: https://doi.org/10.12737/17526.

APA

Kaznacheeva A., Polinko Y. (2016). IDENTIFICATION OF RESIDUAL STRESSESIN PRODUCTS FROM CARBON- CARBONACEOUSMATERIALS. Construction and Architecture, 2(4), 0-0. https://doi.org/10.12737/17526

Chicago

Anna Kaznacheeva, Polinko Y.. "IDENTIFICATION OF RESIDUAL STRESSESIN PRODUCTS FROM CARBON- CARBONACEOUSMATERIALS." Construction and Architecture 2, no. 4 (2016): 0-0. https://doi.org/10.12737/17526.

WIKI

{{cite journal | author = Kaznacheeva A., Polinko Y. | title = IDENTIFICATION OF RESIDUAL STRESSESIN PRODUCTS FROM CARBON- CARBONACEOUSMATERIALS | journal = Construction and Architecture | year = 2016 | volume = 2 | issue = 4 | pages = 0-0 | doi = 10.12737/17526 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

IDENTIFICATION OF RESIDUAL STRESSESIN PRODUCTS FROM CARBON- CARBONACEOUSMATERIALS

Confirmation